One of the best upgrades you can do for your Bug or your Super Beetle is to convert the old drum brakes to disc brakes. The AC Industries‘ No Hassle Disc Brake Conversion Kits now makes it easier than ever! This first in the industry is 100% bolt on. This kit is so simple to install, that if you can repack your own wheel bearings, you can do this install yourself. There are no spindles to change, just remove the drums and backing plate and replace them with the supplied O.E. quality disc brackets. Install the new rotor and caliper and bleed the brakes. Yes, it’s that simple! We suggest installing new seals and bearings while you are at it, sold as separate kit (see below). This kit will NOT add to the off set of the car.
This kit can be used to convert Thing front brakes to 4-Lug, Chevy/Ford, Porsche or Blank for custom bolt pattern. This kit will widen the Thing track approx. 1/4″ per side.
• (2) Rotors with 5-Lug Dual Pattern – 5 x 4-3/4″ & 5 x 4-1/2″ (Chevy & Ford)
• (2) Caliper Mounting Brackets
• (2) Calipers with D101 Pads
• Caliper Mounting Hardware
• Installation Instructions
Kit reuses original backing plate bolts to mount caliper bracket.
Bearings and seals are sold separately:
Bearing & Seal Kit – (one each part #498490E) ’66-’68-1/2
Bearing & Seal Kit – (one each part #498490L) ’68-1/2-’77
*We can install the wheel bearing races for a small additional fee: #IRACE
NOTE: Requires 15″ wheels or larger. This kit will not work with 14″ wheels.
NOTE: THIS KIT CANNOT BE USED WITH DROPPED SPINDLES
NOTE: THIS KIT CANNOT BE USED WITH BACKING PLATES
• Replacement pads available here: #D101
Master Cylinder Kits including Reservoir for Bajas & Buggies:
Dual Circuit Master Cylinder with Reservoir for Front Disc & Rear Drum: 113698015K
Dual Circuit Master Cylinder with Reservoir for vehicles with Disc Brakes Front & Rear: 113698020K