Description
This is AC Industries‘ rear disc brake kit (non e-brake) for long spline axles.
AC Industries‘ set the highest standard of disc brake kit quality with their unique nodular iron caliper brackets. The superior strength nodular iron caliper brackets maintains proper caliper-to-rotor alignment and will not flex, bend or crack during normal service, like the typical stamped metal brackets found in lower quality kits. Nodular iron caliper brackets offer a much higher level of increased safety, durability and longevity!
Kit includes:
• (2) Rotors with 5-Lug Dual Pattern – 5 x 112mm & 5 x 130mm (Porsche & Bus)
• (2) Calipers
• (2) Nodular iron caliper mounting brackets
• (4) Brake pads #D101
• (2) Seal kit
• Mounting hardware
• Installation Instructions
Note: Requires Four Wheel Disc Brake Master Cylinder, sold separately:
• #113611020BAD Master Cylinder for Four Wheel Disc Brakes, fits ’49-’77 Bug, Ghia & Thing
• #113611020BHD Master Brake Cylinder for ’71-’79 Super Beetle with Four Wheel Disc Brakes
Note: Requires two 25″ long metal brake lines part #113611764B
Note: Rotors comes pre-drilled and threaded to 14mm x 1.5 for the popular Porsche 5 x 130mm and Bus, BMW & Mercedes 5 x 112 patterns and will require threaded wheel studs. We recommend part #601111 (1 ½” long), #601120 (1 ¾” long) or #601121 (2 ½” long) wheel studs depending on your wheel choice. These double ended screw in studs are 14mm on the drum side and 14mm on the lug nut side. You will need five studs per drum.
Stud Installation Note: When installing a screw in stud, it is industry standard to use a tread lock agent to minimize the chance for the threaded stud from backing out when you remove your lug nut. We recommend part #27100.
• Replacement pads available here: #D101