So. Cal. Imports is proud to offer a wide variety of drums and rotors for most any use. Have a special wheel application for your VW but nobody makes a drum or rotor that you can bolt them up to? Well, look again! So Cal Imports’ drums and rotors are the easy solution to your problem. We stock drums and rotors drilled for standard 4-Lug VW, Dual pattern with Porsche 5 x 130mm/5 x 112 Bus, BMW, Mercedes and Chevy 5″ x 4-3/4″ & Ford 5″ x 4-1/2″ Lug patterns. So. Cal. Imports also sells blank drums and rotors that can be custom drilled and tapped or studded for your special wheel application. Just supply accurate lug pattern dimensions and we’ll drill and tap or stud to your exact specifications.
These drums come pre-drilled and threaded to 14mm x 1.5 for the popular Chevy 5″ × 4-3/4″ and Ford 5″ × 4-1/2″ patterns and will require threaded wheel studs. We recommend part #601102, this double ended screw in stud is 14mm on the drum side and ½ x 20 on the lug nut side. You will need five studs per drum.
Stud Installation Note: When installing a screw in stud, it is industry standard to use a tread lock agent to minimize the chance for the threaded stud from backing out when you remove your lug nut. We recommend part #27100. This item will be enough to do two drums or ten wheel studs.
Brake Drum, Bug/Ghia ’58-’67, Rear, 5-Lug (Chevy/Ford – 5″ × 4-3/4″, 5″ × 4-1/2″). Sold ea.