Description
The 113615601CF rear rotors come pre-drilled for the popular Chevy 5″ x 4-3/4″ and Ford 5″ x 4-1/2″ patterns and and have 14mm x 1.5mm threaded holes. This style rear rotor will add approximately 1/4″ of positive offset to the wheel track.
So. Cal. Imports is proud to offer a wide variety of drums and rotors for most any use. Have a special wheel application for your VW but nobody makes a drum or rotor that you can bolt them up to? Well, look again! So. Cal. Imports’ drums and rotors are the solution to your woes. Our drums and rotors can be custom drilled and tapped or studded for your special wheel application. We stock drums and rotors drilled for standard 4-lug VW, Porsche 5-lug, Ford 5-lug or Chevy 5-lug patterns. Or buy them blank for your machinist to accommodate your needs or supply accurate lug pattern dimensions and we’ll drill and tap or stud to your exact specifications. Sold each.
Stud Installation Note: These drums/rotors are drilled with a 14mm x 1.5mm threaded hole. So. Cal. Imports offers a wide variate of screw in studs for most all wheel applications. If you chose to use a lug bolt, test fit the wheel to the drum before installation to confirm that the lug bolt doesn’t protrude past the inside of the drum/rotor and hit other components. Check with the wheel manufacture or your installer to find out what stud is right for you. We do recommend a thread locker product, part #27100.
Screw in Wheel Studs:
Wheel Stud, 14mm x 1/2″, part #601102
Wheel Stud, 14mm x 12 mm, part #601115
Wheel Stud, 14mm x 14mm, 1 1/2″ long, part #601111
Wheel Stud 14mm x 14mm, 1 3/4″ long, part #601120
Wheel Stud, 14mm x 14mm, 2 1/2″ long, part #601121
