Description
AC Industries Long Spline Axle Rear Disc Brake Kit with e-Brake.
AC Industries‘ set the highest standard of disc brake kit quality with their unique nodular iron caliper brackets. The superior strength nodular iron caliper brackets maintains proper caliper-to-rotor alignment and will not flex, bend or crack during normal service, like the typical stamped metal brackets found in lower quality kits. Nodular iron caliper brackets offer a much higher level of increased safety, durability and longevity!
Kit includes:
• (2) Rotors with 5-lug dual pattern: 5″ x 4-3/4″ & 5″ x 4-1/2″ (Chevy & Ford)
• (2) Calipers
• (2) Nodular iron caliper mounting brackets
• (4) Brake pads #D201
• (2) e-Brake cables
• (2) Seal kit
• Mounting hardware
• Installation Instructions
Note: Requires Four Wheel Disc Brake Master Cylinder, sold separately:
• #113611020BAD Master Cylinder for Four Wheel Disc Brakes, fits ’49-’77 Bug, Ghia & Thing
• #113611020BHD Master Brake Cylinder for ’71-’79 Super Beetle with Four Wheel Disc Brakes
Note: Requires two 25″ long metal brake lines part #113611764B
Stud Installation Note: These drums/rotors are drilled & tapped with a 14mm x 1.5mm threaded holes. So. Cal. Imports offers a wide variate of screw in studs for most all wheel applications. If you chose to use a lug bolt, test fit the wheel to the rotor/drum before installation to confirm that the lug bolt doesn’t protrude past the inside of the rotor/drum and hit other components. Check with the wheel manufacture or your installer to find out what stud is right for you. We do recommend a thread locker product, part #27100.
Screw in Wheel Studs:
Wheel Stud, 14mm x 1/2″, part #601102
Wheel Stud, 14mm x 12 mm, part #601115
Wheel Stud, 14mm x 14mm, 1 1/2″ long, part #601111
Wheel Stud 14mm x 14mm, 1 3/4″ long, part #601120
Wheel Stud, 14mm x 14mm, 2 1/2″ long, part #601121
• Replacement pads available here: #D201
