Description
Weber Carburetor Filter Screens, Fits 48-51 IDA. Sold as pairs.
Filter screens help to keep larger debris from entering the carburetor venturi. The filter screens fit inside of the velocity stacks on Weber 48 IDA and EMPI EPC 48/51 carburetors.
Application Note: This product will fit vehicles equipped with the following;
- Weber 48 IDA.
- Weber 48 DCOE -only
- EMPI EPC 48/51
- Not for Off-Road Use!
Installation Notes;
These “Dome Stack Screens” fit within the throat of most Weber Velocity Stacks. They may be adjusted slightly with pliers to fit slight variations in the diameter of the Velocity Stack. i.e. 44-IDF to 45-DCOE.
- Push the dome into the velocity stack with your fingertips on the outer ring. DO NOT PUSH ON THE MESH DOME.
- To remove the dome, use small pliers to grip the tabs on the outer ring. DO NOT PRY ON THE EDGE – YOU MAY DAMAGE THE MESH.
- If the dome screen fits too loosely, use pliers to adjust the edges of the slotted skirt; slightly bending 4 corners is usually adequate.
- This is a sturdy product that should provide many years of protection
Note: These will not fit 48 IDF Weber carbs. For Weber 48 IDF carburetor filter screens order part# 99008.045
