Description
Kuhltek 010 Distributor, Electronic Ignition with Centrifugal Advance. Fits all cars and buses with 12 volt electrical systems.
NOTE: The following must be understood before installing and using this distributor:
1. Installing the ignition module wires to the coil with reversed leads and turning on power will instantly damage the module.
2. Leaving the ignition switched to the run position without the engine running for an excessive period of time will cause the module to fail.
3. Using a coil with less than 3.0 ohms resistance will damage the module.
4. The vehicle must have a properly working electrical/charging system. The alternator/generator out put must not exceed 13.7 volts.