New from AC Industries, this disc brake kit will allow you to convert to the 5 x 205mm lug pattern when you have existing four lug style disc brake already on your car! You must have spindles that accept the common two piston calipers from a Karmann Ghia or early T3 with a 56.5mm spacing between the two mounting bolt holes, which is the most common caliper for a VW in the world! This conversion kit will work with the same master cylinder and wheel bearings that existing on your car now.
It really is this simple to change your four lug style front disc brakes to the older 5 x 205mm lug pattern. Remove the two pistons calipers, remove the existing rotors. Install the bearing races, grease the wheel bearings and seals, install the rotors and new floating calipers, finish with bleeding the brakes. You’re done! Bolt on your choice of 5 x 205mm wheels and go enjoy your car!
• (2) front rotors
• (2) new floating calipers with premium semi-metallic brake pads #D391
• (2) 15″ braided stainless steel DOT brake hoses
• (4) caliper mounting bolts and washers
• Step by step instructions
NOTE: Requires 15″ wheels or larger. This kit will not work with 14″ wheels.
• Replacement pads available here: #D391